ModTest Pro

MODBUS Test Pro is a fast and simple utility for testing MODBUS devices over WiFi or Bluetooth. It supports a wide range of MODBUS functionality, including the ability to operate as a master or slave (client or server). It supports both TCP and UDP connections when using WiFi and it supports serial communication via HM-10 Bluetooth Low Energy (BLE) modules.

Simply tap the Setup button for the communication setup page to enter the communication parameters for your device. Return to the main display view to send your poll and view the data (when in client mode) or accept and respond to data requests from a master device (when in server mode).

The Comm Setup view allows a number of addressing, timing, and communication mode parameters to be configured. Besides a comprehensive user guide, the app also has extensive built-in help. Tap on any yellow label or info button for a description of that parameter.

The app supports MODBUS-TCP, MODBUS-RTU, and MODBUS-ASCII protocols, and they can all be transmitted via TCP, UDP, or Bluetooth. It also supports the GSI protocol which was developed in 1985 and was the first tank gauging protocol to use standard RS232 and RS485 serial data communication media. The app also features a User Data Mode that allows you to enter a complete poll string independent of any particular protocol. This allows transmission of special ASCII data polls or any MODBUS command that is not natively supported by the app.

The following MODBUS function codes are supported:
1 – Read Coils
2 – Read Discrete Inputs
3 – Read Holding Registers
4 – Read Input Registers
5 – Write Single Coil
6 – Write Single Register
15 – Write Multiple Coils
16 – Write Multiple Registers

Addresses must be entered in standard MODBUS format (0-65535). If you are accustomed to specifying register addresses in "Modicon format", simply subtract 1 from the Modicon Address and delete the prefix number. For example, Modicon Holding Register 40101 is equivalent to MODBUS address 100.

The app supports a wide range of data representations including:
Unsigned Integer: 16 bit, 32 bit, and 64 bit
Signed Integer: 16 bit, 32 bit, and 64 bit
Floating Point: 32-bit, and 64-bit using IEEE-754 specifications
Hex Data Strings: 16-bit, 32 bit, and 64-bit
Bit and Byte Representations for Coils & Discrete Inputs

The app also supports the following "reverse modes" of floating point data storage:
Atomic 8-bit Little Endian
Atomic 16-bit Little Endian
PDP Endian
Bit Reversal

When you exit the Comm Setup page, WiFi connections will be established automatically; however, a manual scan must be initiated to find and select a BLE module within range in order to establish a Bluetooth connection. After a successful Wifi or BLE connection, simply tap the Start Poll button to send your poll command (when in client mode). If you turn the Continuous Poll switch on, the Start Poll button will change to a Stop Poll button while the poll is in progress. When in server mode, the app will wait for and respond to poll requests from a master device once a WiFi or BLE connection is made.

A communication status window will show the raw byte strings that are sent to and received from a remote device. Received data will also be shown in tabular form when in client mode and communication events will be shown when in server mode. The app also tracks a number of communication statistics.

When using WiFi your device must be on the network as the device that you want to test. Be sure to use the Settings app to configure your network settings before using the app or you will surely get socket connection errors.

The app contains no ads or in-app purchases and we will never nag you for reviews, although we do appreciate them. We appreciate your feedback and the app includes a convenient email form to send us comments or suggestions. If you have any issues with the app, please send us a message before posting a negative review and give us a chance to address your concerns.