Safety Shower Builder

Emergency safety showers and eye/face washes are special occupational safety equipments designed to wash chemicals or toxic substances that come in contact with skin, eyes or clothing, meeting the requirements of international standards. Emergency showers can be defined as a first aid equipment that should be used as a necessity for emergency response to reduce the effects of accidents at a workplace. Since these are the products which are directly related to human health, it is a necessity to produce them in accordance with the relevant European and / or American standards and carry the markings of the relevant standards.

The Occupational Safety and Health Administration (OSHA) has defined it clearly what types of workplaces are required to have an emergency shower (Where any person's eyes or body may be exposed to harmful corrosive substances, suitable facilities shall be provided for immediate use in the workplace for immediate washing of eyes and body”).

We provide variety of special services you may need.

Engineering Consultation
IST Safety Ltd provides complete information on the design, use, supply and care of emergency showers, eye/face washes and decontamination units. For all your needs during a new plant installation or facility renovation, our experienced team will guide you to the best and most economical solution.

Quality and Safe Product Selection
Our product range has a wide range of standard and optional designs. For interior and exterior applications, we offer high quality systems with heating or cooling, with freeze protection, portable or fixed special systems.

Special Engineering Solutions
Each emergency shower is designed for different purposes and cannot substitute each other. In addition, standardized units with heating or cooling, may not always be the right choice for your needs. IST Safety Ltd is fully equipped to offer and produce the special designed systems according to your needs.

Adjusting Water Temperature
Tepid water supply (16 - 38 ° C), which is a requirement of both American and European standards, requires special attention. Our expert team has the capability to analyze resources of your facility and offer solutions to ensure that emergency showers and eye / face washes will work properly under all circumstances. Our experts will work in coordination with your design or expert team.

Pre-Sales Solid Modelling and Technical Drawing
We provide customized design and engineering solutions to customers with our advanced three-dimensional solid modelling software. In this way, our customers can more easily analyze the suitability of the product to their facility and can plan the project accordingly. Two or three dimensional detailed technical drawings are available for all our products.

After-Sales Support
Our expert technicians can evaluate your existing emergency showers and eye/face washes to ensure compliance with ANSI and EN Standards. Our expert team will assist you about training and product setup for your new emergency shower.

The Importance and Advantages of Tank Showers
The ANSI/ISEA Z358.1-2014 standard requires emergency showers to provide defined ”TEPID” water for 15 minutes at a continuous temperature of 16-38 °C. Occupational health and safety experts or workplace authorities should now be aware that they have no option to deliver cold water from the mains supply directly to the emergency shower.

Since each emergency shower is designed for different purposes and cannot substitute each other, we have created an interactive 3D model configurator for tailored overhead emergency tank showers and safety showers with cabinet to help the users and distributors design and build the safety shower according to customer's needs.

Following tank showers are available in the app.

Suitable for Hazardous Area and Hot Climates
Suitable for Hazardous Area and Cold Climates
Suitable for Non-Hazardous Area and Hot Climates
Suitable for Non-Hazardous Area and Cold Climates