DODYMPS Pro

DODYMPS is an advanced OBDII/EOBD diagnostic scanning tool that helps the automotive repair and the day-to-day owners quickly grasp the vehicle's operating status and fault information, and gives detailed reasons for vehicle faults.

Detailed Description


Feature
1. Fault lamp description
When your vehicle fault light is on, if you don't know what this light means, APP has 17 common fault lights description these instructions will tell you the specific definition of the fault.


2. Defect Failure
The failure detail was displayed when check vehicle is fault,failure detail contain Fault code, The fault detailed description and cause,etc.


Note:Fault code have 3 types:Pending,Confirmed,Permanent


Pending:Uncertain,sporadic failures.


Confirmed:Determined fault


Permanent:Permanently faulty car will not be lost after power failure,and it cannot be cleared by clearing the fault code command. Only when the fault is repaired, ECU will automatically eliminate if it detects no fault.

3. Clear Fault Code
After the user has repaired the fault,

if the fault code is still present when the fault is checked, can be cleared from EUC by clicking clear fault code



4. Freeze Frame Data
When the vehicle fails, the ECU will automatically record the part of PID data.The user can easily know the situation of each part of the car when the fault occurs by querying the freeze frame data and then quickly analyze the cause of the problem.


5. Common Parameters
APP support display common parameters,for example Accumulated mileage, Accumulated fuel consumption, Instantaneous fuel consumption, Battery voltage, Speed, Vehicle speed, Intake air flow, Intake pressure, Coolant temperature, Intake air temperature and Remaining oil in order that the users more conveniently and intuitively understand their own vehicles.


6.Real-time Data
APP supports more than 80 vehicle PID data display.Each PID supports Graph,Curve and number display.and you can set the display range of the minimum and maximum values


7. MIL Status
Use to count engine running time after fault lamp on,mileage of the vehicle,the time after fault code is cleared,the mileage after the fault code is cleared and the running time after the engine is started


8. Alarm
Used for setting fault alarm switch, Fatigue driving alarm switch, Fatigue driving time and Coolant alarm temperature.


9.Loss Item
Use to record Battery,Front wiper,Rear wiper,Front tire,Rear tire replacement time and mileage


10. Record
Use to queried the fault code detail times and record.