NovaScan - The OBD Total Solution

*** This app only supports general OBD standards. Proprietary sub-systems are NOT supported. ***

Sincerely, this is a must-have app for new driving experience for both professional and enthusiastic practices.

======= If you need =======
→ Fully customizable, cool and elegant OBD dashboards / gauges / HUD / realtime plots (front window projectable)
→ Dyno / dynamometer charts with performance tests (including MaxHorsepower, 60mph and 100Km/h test)
→ Logging, analyzing or exporting data from various data source for further physics analysis or tuning
→ Gathering hidden live data and vehicle info
→ Performing on-board diagnostics, monitors and tests (complete mode 5 / 6 / 8 supported)
→ Over 500+ live data and 10,000+ trouble codes supported

NOTICE: You need a NovaScan OBDII WiFi Transmitter™ (or ELM327 Compatible WiFi Transmitter) before using this app.

Please visit http://ubiqcom.net or http://novascan.biz for more details.


======= INTRODUCTION =======
NovaScan remotely scans live data from vehicles with sophisticated dashboards, graphing, logging and analyzing systems. It enables drivers to get insight into vehicles and driving dynamics.

All contents are designed to comply with the OBDII standards. Vehicles manufactured after 1996US / 2000Europe (followed by many nations) ought to comply with the standards.


======= FEATURES =======
→ Advanced Time Monitoring and Management Strategies (High Data Accuracy / Precision)
→ ALL functions are applicable to ALL components in vehicles that comply with OBDII standards.
→ Conversions between Metric/US/UK units effects throughout this app and configurable individually.

(1) Vehicle Profile Management - Advanced multiple vehicles management

(2) Dashboards
(2.1) My Dashboards - "Composes your own customized dashboards from various data source (over 500+)! Enjoy!"
(2.2) Performance / Fuel / Engine (Default)
→ Fuel Efficiency: Instant/Average KPL/MPG[US, UK], Instant/Average/Total Fuel Consumption
(Supports customizable fuel blends among Gasoline, Diesel, Bio-diesel, Ethanol, LPG & Methanol. e.g., E5, E85)
→ Performance: Ac/Deceleration, Horsepower, Torque, Manifold Air Pressure, Speed, RPM
→ Engine Status - Operations: Engine Load, Throttle Position, Spark Advance Degree, LAMBDA, Manifold Air Pressure, Mass Air Flow
→ Engine Status - Temperature: Ambient / Intake Air / Coolant Temperature
→ Baro/Fuel Rail Pressure: Baro, Fuel Rail, Fuel Rail(Absolute), Wide Range Fuel Rail, Fuel Rail to Manifold Pressure
→ Fuel Tank System: Fuel Level, Evap, Evap(Absolute), Wide Range Evap Pressure
→ Short/Long Term Fuel Trim: Bank 1 - 4
(2.3) Complete O2 Sensors & Catalysts Temperature (Default)
→ O2: Bank 1 - 4 (Including wide range voltage and current)
→ Catalyst: Bank 1 - 2
(2.4) GaugeFun (Default) - "Lots of useful gauges. Of course, you can make yours."

(3) Log & Analysis - "Logs and analyzes highly accurate and precise data from any dashboards or exports them in CSV format for further comprehensive physics analysis by any means you want!"

(4) On-board Diagnostics, Monitors and Tests
(4.1) Reads and reset DTC (Diagnostics Trouble Codes) and MIL (Malfunction Indicator Light) with detailed explanations
(4.2) Monitors / Tests Center (Complete mode 5 / 6 / 8 supported on all protocols)
→ Status Overview
→ Oxygen test results with detailed graphs
→ Misfire monitoring results (Supports 16 cylinders)
→ Universal Viewer for Exhaust Gas Sensors, Catalyst, EGR, VVT, EVAP, Purge Flow, Exhaust Gas Sensor Heater, Heated Catalyst, 2nd Air, Fuel System, Boost Pressure Control, NOx Adsorber, NOx/SCR Catalyst and Misfire
→ Request to enable EVAP Leak Test Conditions
→ Request to initiate DPF, Diesel Particulate Filter, Regeneration

(5) Powerful and tidy IOS/SAE regulated LiveData/Status/VehicleInfo Viewer



Thank you for viewing this app！