RIKA WarmApp GSM

The RIKA WarmApp sends SMS to the GSM-modem of your RIKA stove. Depending on stove model and built-in accessories, you can control different features.
If you enable the location detection on your device, the WarmApp+ will display weather and outdoor temperature automatically (needs internet connection).
You have many options to control pellet and combination stoves. You can change the operating mode and vary the heating power. As you have a room sensor assembled, you can adjust the room temperature or activate the frost protection. You can also inquire about the current operating status as well as synchronizing the time.
Concerning stoves equipped with R4, you can ignite the prepared stove at an assigned time and control the MultiAir fan (if assembled). You can also inquire about the current operating status as well as synchronizing the time.
Wherever you are, it is possible to create a warm, cosy home that awaits your arrival!

System requirements:
RIKA GSM Control
iOS Version 9.0
RIKA pellet or combination stove with touch display (software V2.20 or higher)
– contact your local dealer when an update is required:
RIKA pellet stove with key display Version v1.44
Wood burning stove software R4 Version 1.02
Version of WarmApp+ Lite 1.0

To use the free WarmApp+ it is necessary to install the GSM-modem in your RIKA stove. You need a SIM-card with credit to send response SMS and a GSM capable device to use the RIKA WarmApp+.

Note: The RIKA WarmApp+ Lite is not compatible with RIKA FireNet. More information about the RIKA FireNet can be found on our homepage: www.rika.at/en/pellet_stove_benefits/