Septic

Septic calculates the depth for setting septic tanks, if you are using a laser level or other  similar measuring device.   Septic will display the reading you want for your tank(s) based on the stub out reading, distance to the tank(s) and the inlet height of the tank(s) you are installing.
Start by entering the measurement at the stub out. Then enter the distance from the stub out to where the tank inlet will be. Touch Select Tank, then choose your tank from the Picker Wheel. Press Calculate to get your measurement for the depth to set your tank. There is a double picker wheel if you are installing two tanks of different sizes. There is a triple picker wheel if you have three tanks of different sizes to install. Septic is pre-populated with a list of common size tanks.  You can edit the name of any tank, inlet height or outlet height from the Edit tab. You can add your own tanks, delete tanks that you don’t want or change the fall rate to the tank.