SetupCalculator

The setup process of repeatedly measuring and adjusting the different suspension parameters can take a lot of time you don’t have.
With the SetupCalculator you can shortcut the setup process by calculating the necessary adjustments to the suspension to reach your target setup. You reduce the number of work steps by setting heights, cross weights, toe and camber at the same time.


Calculate Suspension Adjustments:
The SetupCalculator is calculating the necessary adjustments to achieve your target setup for heights, cross weights, toe and camber. You can read off the required adjustments in millimeters, turns and flats for the spring plates and push-/ pullrods, camber and toe.


Save Time:
The calculation includes interdependencies of heights, cross weights, toe and camber. This means that you can set several setup parameters to your target values at the same time. The setup process consisting of repeatedly measuring and setting the individual parameters can be shortened significantly.


Combine Ride And Chassis Heights:
You can use ride heights as well as chassis heights as your target. When you enter your target ride heights, the resulting chassis heights are calculated and displayed automatically and vice versa. With this feature you can easily check whether your chosen ride heights are compatible with the minimum allowed chassis heights and whether the right and left sides of the car are at the same height or at an angle. If the measuring points on the vehicle are not in a plane, e.g. due to a bent chassis or inaccuracies of the underfloor mounting, you can split the resulting deviation from the geometrically possible values to your target values between the two axles as you prefer.



Available Cars:
AMG GT3
AMG GT4