You are using an outdated browser. Please upgrade your browser to improve your experience.
Copterus #1 Autopilot for DJI

Autopilot flight app for DJI drones

Autopilot flight app for DJI drones

Copterus #1 Autopilot for DJI

by Nikolay Leshchikov
Copterus #1 Autopilot for DJI
Copterus #1 Autopilot for DJI

What is it about?

Autopilot flight app for DJI drones.

App Details

Version
1.2.0
Rating
(7)
Size
238Mb
Genre
Photo & Video Utilities
Last updated
April 30, 2021
Release date
September 22, 2020
More info

App Screenshots

Copterus #1 Autopilot for DJI screenshot-0
Copterus #1 Autopilot for DJI screenshot-1
Copterus #1 Autopilot for DJI screenshot-2
Copterus #1 Autopilot for DJI screenshot-3
Copterus #1 Autopilot for DJI screenshot-4
Copterus #1 Autopilot for DJI screenshot-5
Copterus #1 Autopilot for DJI screenshot-6
Copterus #1 Autopilot for DJI screenshot-7
Copterus #1 Autopilot for DJI screenshot-8
Copterus #1 Autopilot for DJI screenshot-9

App Store Description

Autopilot flight app for DJI drones.

Plan and fly automated missions:
- Linear waypoints with in-point actions
- Waypoints with auto heading to POI
- Survey grid and double grid for area 2D/3D mapping
... more info below

Supports almost all DJI drones (see full list below). Mini 2 is not supported.

* Icing on the Сake *
- No ads
- No logins and signups
- No subscriptions
- No extra feature unlocks
- Unlimited missions to plan, save and fly
- Unlimited drones and batteries to save and monitor
- Easy safety settings
- Seamless data sync between all your iOS devices using iCloud

* Supported DJI Drones *
- Spark
- Mavic Mini 1
- Mavic Air, Air 2
- Mavic Pro, 2 Pro, Zoom, Enterprise
- Phantom 3 Standard, Advanced, Pro, 4K
- Phantom 4 Standard, Advanced, Pro, Pro V2, RTK, Multispectral
- Inspire V.1 (Pro, RAW), V.2
- Matrice 100, 200, 200 V2, 210, 210 V2, 210 RTK, 210 RTK V2, 300 RTK, 600, 600 Pro
- Flight controllers: A3, N3
- Agras with A3 controller

* Supported DJI Cameras *
DJI Zenmuse X3, X4 S, X5, X5 R, X5 S, X7, XT, XT S, XT2, Z3, Z30, H20, HT20

* IMPORTANT! *
Before takeoff, make sure your planned flight path is free of any obstacles. Especially if you fly a drone without/disabled vision system or at night.


What's inside:

* Area Mapping *
Survey missions for 2D orthophoto and 3D area reconstruction. Draw custom polygon, set altitude, tune front and side overlaps and you are ready to fly with just one tap.
Use Copterus app to capture aerial images. Then process them with your favorite photogrammetry software (Metashape Pro, WebODM, Pix4D, Drone Deploy, MapsMadeEasy, SimActive etc) to get orthomosaic maps, digital terrain and elevation models (DTM, DEM).
- Automatic flight planning based on camera parameters, overlaps and altitude
- Estimates for GSD, flight time, number of photos and batteries
- Multiple flights for massive areas
- Custom start/finish positions
- Pause mission and move backwards to retake some photos
- Automatic takeoff or start mission after manual takeoff
- Plan beforehand and try any DJI drone and camera to fit your mission
- Land, hover or return after flight
- Go Home on connection loss or continue mission (Spark, Mini and Air 2 do not support connectionless mode)

* Waypoints Mission *
For smooth and repeatable time-lapse videos and photos (even seasonal time-lapse), photo reports from the same exact positions, search and rescue operations, aerial monitoring and video surveillance.
Tap desired locations to draw a flight path. Set common mission params, then tune points' altitude, heading, gimbal position and add some actions.
- In-point actions: wait, take photo, start/stop video, rotate aircraft (yaw), set gimbal angle. Up to 15 in each waypoint)
- Round-repeat waypoint actions up to 15 times
- Custom actions timeout
- Point-to-point or curved flight path with adjustable turn radius near each point
- Ability to control drone's speed with RC joystick during automated flight
- Set autospeed to 0 and move drone with RC joystick along its planned path - just like a cable camera
- Auto-repeat mission up to 15 times
- Go Home on connection loss or continue mission (Spark, Mini and Air 2 do not support this mode)

* POI Mission *
- Add point of interest (POI) to waypoint mission for auto heading

* KML Import *
- Create mapping or waypoint mission from KML polygon or line respectively
- One file can contain multiple KML features, choose one on import

* Drones and Batteries Management *
- All system states and info, errors and warnings
- Batteries health info. Checked and saved on each connection, available anytime
- Multi-battery support
- Save your drones and batteries to track state

* Weather and Sun *
- Hourly weather forecast with wind warnings
- Sunrise and sunset time


Check Copterus app website for more info, discussions, support and tutorials:

www.copterus.app

Feel free to send your questions or requests:

[email protected]

Disclaimer:
AppAdvice does not own this application and only provides images and links contained in the iTunes Search API, to help our users find the best apps to download. If you are the developer of this app and would like your information removed, please send a request to [email protected] and your information will be removed.